7Axis Industrial Client area

INDUSTRIAL AUTOMATION / PLC · HMI · MOTION

PLC, HMI programming
and industrial control

Siemens and Omron PLC and HMI programming, with variable frequency drive and servomotor integration. From a specific modification to the control system of a complete machine.

PROGRAMMING AND CONTROL

From the machine cycle
to everyday operation.

You can commission machine programming and control as a specific service, or include them in a complete mechanical, electrical and automation project.

  • PLC sequence programming and modifications.
  • HMI screens for operation, settings, jobs and diagnostics.
  • Alarms, operating conditions and process interlocks.
  • Integration of sensors, encoders, motors and drives.
  • Data recording and export according to the application.
  • Testing and commissioning within the agreed scope for each machine.

I develop electrical schematics and documentation in EPLAN as part of electrical and automation work, within the commissioned scope. I coordinate that documentation with the installed equipment, PLC program and HMI screens.

Mechanical design and prototyping

RV-510 HMI: multi-lane validation with deliberately introduced faults.
RV-510 HMI: multi-lane validation with deliberately introduced faults.
RV-510 HMI: history and CSV export with test data.
RV-510 HMI: history and CSV export with test data.

PLC AND HMI

Siemens and Omron.
Control for your machine.

I work with Omron PLCs programmed using CX-Programmer and Siemens systems in TIA Portal, as well as older Siemens S7-200 systems.

The sequence and interface are developed together: what the machine must do, what the operator can adjust and what information helps them operate it and identify an issue.

Component selection and the scope of work depend on the installation, functions and available documentation.

Modules and connections in an Omron control system.
Modules and connections in an Omron control system.
Siemens S7-1200 PLC and expansion modules in an electrical cabinet.
Siemens S7-1200 PLC and expansion modules in an electrical cabinet.

MOTORS, DRIVES AND ENCODERS

The drive is also
part of the control system.

I work with variable frequency drives from Omron, Schneider Electric, Yaskawa and Lenze, alongside other equipment depending on the application.

I also work with Omron, Delta and other servomotor brands, depending on the equipment.

Three-phase motors, stepper motors and encoders are part of the drive and control solutions I integrate according to the needs of the machine.

Integration considers the motor, control method, speed references and process response. Parameter settings, adjustments and diagnostics are assessed as part of the complete system, together with the PLC and machine operation.

EXISTING MACHINERY

Change what is needed.
Keep what works.

A control modification can start with a machine already in service. Before intervening, I review its operation, installed equipment, available program backups and documentation.

I assess machinery retrofits and the migration of obsolete PLCs and HMIs: updating controls, replacing older equipment and integrating new functions while retaining useful components. Interfaces, program adaptations and commissioning tests are defined for each intervention.

Whether a program can be obtained from the device depends on its model, condition and available access.

Siemens SIMATIC S7-300 PLC and control modules in existing machinery.
Siemens SIMATIC S7-300 PLC and control modules in existing machinery.

DIRECT CONTACT

Understand your machine.
Define the work.

Start by telling me which machine you have, which PLC, HMI or drive it uses and what you need to resolve. Photographs of equipment references, diagrams and any program backups help define the intervention.

Site work in Barcelona and the Vallès area, with scope, travel and availability agreed for each job.

Discuss a programming and control job ↗

Technology is the means.
Your need is the starting point.

View solutions

Your next step

What do you need to solve?

Tell me what you want to achieve and which part, equipment or process is involved. You do not need to have the solution worked out.